On September 23, 2025, the Central Bank of Nigeria (CBN) reduced its Monetary Policy Rate by 50 basis points to 27 percent, marking its first interest rate reduction in approximately five years. The decision followed signs of easing inflation, which the National Bureau of Statistics reported had declined to 20.12 percent in August. Although the reduction offered some relief to businesses, borrowing costs remained high, placing continued pressure on manufacturers already grappling with rising operating expenses and limited access to affordable financing.
Nigeria’s manufacturing sector was also showing signs of improvement. According to the Manufacturers Association of Nigeria (MAN), average manufacturing capacity utilization increased to 61.3 percent in the first half of 2025, compared with 57.6 percent in the second half of 2024. Manufacturing output also recorded growth of approximately 1.6 percent in the second quarter.
For James Okoroama, an industrial reliability engineering leader whose career spans more than two decades across Africa and North America, these challenges underscore an important principle: equipment reliability is not merely an engineering concern but a fundamental driver of industrial productivity and financial performance.
Leading Reliability at Industrial Scale
In 2025, Okoroama assumed expanded senior regional leadership responsibilities in reliability engineering, robotics and facilities maintenance at Amazon, overseeing more than 600 technical professionals across multiple automated logistics and fulfilment facilities in North America. His portfolio included industrial assets valued at more than $2.4 billion and an annual parts, repairs and maintenance budget exceeding $40 million.
The appointment followed a period of acting regional leadership during a planned organizational transition, when he assumed responsibility for coordinating engineering operations, technical workforce development, equipment reliability and regional maintenance performance. Managing reliability at this scale requires more than resolving equipment failures. It involves aligning technical operations with financial objectives, establishing consistent engineering standards and developing leaders capable of sustaining performance across geographically dispersed facilities.
“Every unplanned breakdown is money borrowed at the worst possible rate,” Okoroama said. “Reliability is not a cost centre. It is a balance-sheet strategy.”
His argument reflects the financial implications of equipment downtime. When critical industrial assets fail unexpectedly, organizations can incur costs associated with lost production, emergency repairs, expedited spare parts, overtime and reduced asset utilization. For manufacturers operating in high-interest-rate environments, these disruptions can place additional pressure on working capital and profitability.
Okoroama’s regional responsibilities built upon operational improvements recorded during his earlier leadership assignments. While serving as acting regional manager, he reported equipment uptime of approximately 99.96 percent during the first quarter of 2025 and 99.95 percent year to date as the second quarter approached its conclusion. These results reflected the collective efforts of engineering teams, operations leaders and technical specialists working to improve equipment performance and reduce unplanned downtime.
Upon assuming broader regional responsibilities, Okoroama also focused on addressing maintenance budget overruns through tighter financial controls, improved contract management, spending governance and more disciplined maintenance planning. His approach emphasizes the relationship between technical reliability and business performance. Improving equipment availability can reduce operational interruptions, while effective spare-parts management and preventive maintenance can help organizations control expenditure and extend asset service life.
For Nigerian manufacturers, the financial implications can be particularly significant. Industrial equipment and replacement components are frequently imported, exposing businesses to foreign exchange fluctuations, international shipping costs and extended procurement lead times. A failed gearbox, motor or critical control component may interrupt production for days or weeks if replacement parts are unavailable locally.
When financing costs remain elevated, the resulting production losses can compound an already difficult operating environment.
Despite the scale of his responsibilities, Okoroama attribute’s sustainable reliability performance to the development of capable engineering teams and effective frontline leadership. He believes that senior engineering leaders must establish clear operating standards, develop technical competence and create organizational mechanisms that allow teams to make sound decisions without constant executive intervention.
“No leader can fix every fault personally,” he said. “Your job is to build standards and leaders strong enough that the right decision happens at 2 a.m. without you.”
At the regional level, this means establishing consistent maintenance procedures, clear equipment inspection standards, effective escalation mechanisms and structured processes for investigating recurring failures. It also requires developing technical leaders who understand the relationship between operational inputs and performance outcomes.
Among the measures Okoroama emphasizes are Mean Time Between Failures (MTBF), which helps organizations evaluate equipment reliability, and Mean Time to Repair (MTTR), which provides insight into maintenance response and restoration effectiveness.
However, he argues that performance indicators are only useful when leaders understand the operational actions required to improve them. Effective maintenance leadership therefore involves translating reliability data into practical interventions, including preventive maintenance optimization, defect elimination, technical training and improved equipment troubleshooting.
Other News
Across his leadership assignments with Daifuku and Amazon, Okoroama has supported the professional development of maintenance engineers, supervisors and managers, helping build leadership pipelines and prepare technical professionals for broader responsibilities.
Managing multiple industrial facilities introduces a challenge familiar to manufacturers operating across different regions: maintaining consistent standards while accounting for local operating conditions. Although facilities may use similar equipment, differences in environmental conditions, workforce experience, production demands and supplier performance can influence equipment reliability.
Okoroama’s approach combines standardized engineering practices with the judgment and adaptability of local technical leaders. Common maintenance standards establish a consistent foundation for equipment inspections, safety procedures, performance monitoring and failure analysis.
Local leaders, meanwhile, must be equipped to identify conditions that require site-specific interventions. These may include equipment exposed to extreme temperatures, recurring failures associated with operating conditions, workforce capability gaps or delays in critical spare-parts supply.
For Okoroama, this balance between standardization and local decision-making is essential to maintaining reliability across geographically dispersed operations. His understanding of these challenges extends back to his earlier industrial career in Nigeria. Before moving into North American industrial operations, he held regional technical responsibilities with Just Food West Africa, supporting equipment installation, maintenance and reliability activities across 17 Nigerian states.
Working across different operating environments exposed him to the effects of climate, infrastructure limitations, technical workforce capability and maintenance practices on equipment performance. The experience reinforced his belief that effective industrial leadership requires both consistent engineering standards and sufficient local expertise to respond to operational realities.
For Nigerian businesses operating multiple manufacturing plants, distribution centres or industrial facilities, Okoroama believes many of the principles used in large-scale reliability engineering can be adapted to local operations.
These include consistent equipment performance measurement, structured maintenance planning, risk-based spare-parts management and stronger technical leadership development. He recommends that manufacturers begin by identifying their most critical assets and understanding the operational and financial consequences of their failure.
Equipment downtime should be recorded systematically, including the duration, cause, production impact and associated maintenance costs. Organizations can then prioritize interventions based on equipment criticality, recurring failure patterns and the potential consequences of unplanned outages.
For significant or recurring failures, structured root-cause analysis can help identify underlying technical and organizational problems rather than repeatedly addressing symptoms. He also advocates a coordinated approach to spare-parts management across multiple facilities.
Rather than maintaining excessive inventory at every location or relying entirely on centralized stores, manufacturers can establish risk-based inventory strategies that ensure critical components remain accessible while minimizing unnecessary working capital commitments. This may involve shared inventory visibility, strategically located spare parts, supplier agreements and improved forecasting of maintenance requirements. Equally important is the development of competent maintenance supervisors and technical leaders capable of applying these practices consistently.
“Nigerian manufacturers cannot control interest rates,” Okoroama said. “They can control whether a preventable breakdown costs them a week of production.”
His message is that manufacturers should focus on operational factors within their control, particularly equipment reliability, maintenance effectiveness, workforce competence and disciplined asset management.
As Nigerian manufacturers navigate high financing costs and ongoing pressure to improve productivity, the relationship between engineering reliability and financial performance is becoming increasingly important. A well-maintained industrial asset can support higher production availability, more predictable operating costs and improved utilization of invested capital. Conversely, recurring equipment failures can erode margins, disrupt customer commitments and increase the financial burden of maintaining industrial operations.
For Okoroama, achieving sustainable reliability requires a coordinated approach involving engineering standards, technical workforce development, financial accountability and effective leadership. The objective is not simply to repair equipment faster, but to reduce preventable failures, extend asset life and create operating systems capable of sustaining consistent performance.
The CBN’s September interest rate reduction represented a modest easing of Nigeria’s monetary conditions. Nevertheless, manufacturers continued to face substantial financing and operating challenges. In such an environment, the ability to prevent avoidable equipment failures and improve maintenance efficiency offers businesses a practical opportunity to protect productivity and control costs. For factory owners and industrial executives, the lesson is straightforward: investments in reliability engineering, maintenance leadership and disciplined asset management can produce benefits that extend well beyond the engineering department.
When every production hour and every unit of capital matters, industrial reliability becomes not just a measure of equipment performance, but an essential component of business competitiveness.

Follow Us on Google
